Learn How To Install Omeka Classic 2.4 CMS on Fedora 26 LAMP VPS
Table of Contents
- Step 1: Add a Sudo User
- Step 2: Update Fedora 26 System
- Step 3: Install Apache Web Server
- Step 4: Open Web Firewall Ports
- Step 5: Disable SELinux
- Step 6: Install PHP 7.1
- Step 7: Install MariaDB (MySQL) Server
- Step 8: Create Database for Omeka Classic CMS
- Step 9: Install Omeka Classic CMS Files
- Step 10: Install ImageMagick
- Step 11: Complete Omeka Classic CMS Installation
If you are using a different system, please check our other tutorials.
How to Install Omeka Classic 2.4 CMS on a CentOS 7 LAMP VPS
How to Install Omeka Classic 2.4 CMS on a Debian 9 LAMP VPS
How to Install Omeka Classic 2.4 CMS on a FreeBSD 11 FAMP VPS
How to Install Omeka Classic 2.4 CMS on an Ubuntu 16.04 LAMP VPS
Omeka Classic 2.4 CMS is a free and open source digital publishing platform and Content Management System (CMS) for sharing digital collections and creating media-rich online exhibits. Omeka Classic 2.4 CMS enables scholars, librarians, archivists, museum professionals and cultural enthusiasts to create complex narratives and share rich collections and content at low cost without sacrificing design and technical quality. Omeka accepts and stores all types of files, including images, video, audio, multi-page documents, PDFs, Power Point presentations; and can handle large archives of metadata and files (with over 1 million items) with the only limitations being the power of your server.
In this tutorial we are going to install Omeka Classic 2.4 CMS on a Fedora 26 LAMP VPS using Apache web server, PHP 7.1, and a MariaDB database.
- A clean IT Web Services Fedora 26 server instance with SSH access
Step 1: Add a Sudo User
We will start by adding a new
First, log into your server as
Add a new user called
user1 (or your preferred username):
Next, set the password for the
When prompted, enter a secure and memorable password.
Now check the
/etc/sudoers file to make sure that the
sudoers group is enabled:
Look for a section like this:
%wheel ALL=(ALL) ALL
Make sure it is uncommented. This line tells us that users who are members of the
wheel group can use the
sudo command to gain
Once you have edited the file, you can save and exit by pressing
Esc and then entering
:wq to “write” and “quit” the file.
Next we need to add
user1 to the
usermod -aG wheel user1
We can verify the
user1 group membership and check that the
usermod command worked with the
Now use the
su command to switch to the new sudo user
su - user1
The command prompt will update to indicate that you are now logged into the
user1 account. You can verify this with the
Now restart the
sshd service so that you can login via
ssh with the new non-root sudo user account you have just created:
sudo systemctl restart sshd
root account (which will disconnect your
You can now
ssh into the server instance from your local host using the new non-root sudo user
If you want to execute sudo without having to type a password every time, then open the
/etc/sudoers file again, using
Edit the section for the
wheel group so that it looks like this:
%wheel ALL=(ALL) NOPASSWD: ALL
Please note: Disabling the password requirement for the sudo user is not a recommended practice, but it is included here as it can make server configuration much more convenient and less frustrating, especially during longer systems administration sessions. If you are concerned about the security implications, you can always revert the configuration change to the original after you finish your administration tasks.
Whenever you want to log into the
root user account from within the
sudo user account, you can use one of the following commands:
sudo -i sudo su -
You can exit the
root account and return back to your
sudo user account any time by simply typing the following:
Step 2: Update Fedora 26 System
Before installing any packages on the Fedora server instance, we will first update the system.
Make sure you are logged in to the server using a non-root sudo user and run the following command:
sudo dnf -y update
Step 3: Install Apache Web Server
Install the Apache web server:
sudo dnf -y install httpd
Then use the
systemctl command to start and enable Apache to execute automatically at boot time:
sudo systemctl enable httpd sudo systemctl start httpd
Check your Apache configuration file to ensure that the
DocumentRoot directive points to the correct directory:
sudo vi /etc/httpd/conf/httpd.conf
DocumentRoot configuration option will look like this:
Now, let’s make sure that the
mod_rewrite Apache module is loaded. We can do this by searching the Apache base modules configuration file for the term “
Open the file:
sudo vi /etc/httpd/conf.modules.d/00-base.conf
Search for the term
mod_rewrite Apache module is loaded, you will find a configuration line looking like this:
LoadModule rewrite_module modules/mod_rewrite.so
If the above line starts with a semi-colon, you will need to remove the semi-colon to uncomment the line and load the module. This, of course, applies to any other required Apache modules too.
We now need to edit Apache’s default configuration file so that
mod_rewrite will work correctly with Omeka Classic CMS.
Open the file:
sudo vi /etc/httpd/conf/httpd.conf
Then find the section that starts with
<Directory "/var/www/html"> and change
AllowOverride none to
AllowOverride All. The end result (with all comments removed) will look something like this:
<Directory "/var/www/html"> Options Indexes FollowSymLinks AllowOverride All Require all granted </Directory>
Now save and close the Apache configuration file.
We will restart Apache at the end of this tutorial, but restarting Apache regularly during installation and configuration is certainly a good habit, so let’s do it now:
sudo systemctl restart httpd
Step 4: Open Web Firewall Ports
We now need to open the default
HTTPS ports as they will be blocked by
firewalld by default.
Open the firewall ports:
sudo firewall-cmd --permanent --add-port=80/tcp sudo firewall-cmd --permanent --add-port=443/tcp
Reload the firewall to apply the changes:
sudo firewall-cmd --reload
You will see the word
success displayed in your terminal after each successful firewall configuration command.
We can quickly verify that the Apache
HTTP port is open by visiting the IP address or domain of the server instance in a browser:
You will see the default Apache web page in your browser.
Step 5: Disable SELinux
SELinux stands for “Security Enhanced Linux”. It is a security enhancement to Linux which allows users and administrators more control over access control. It is enabled by default in Fedora 26, but it is definitely not essential for server security as many Linux server distributions do not ship with it installed or enabled by default.
To avoid file permission problems with Omeka Classic CMS later down the line, we are going to disable SELinux, for now. So open the SELinux configuration file with your favourite terminal editor:
sudo vi /etc/selinux/config
SELINUX=disabled and then save the file.
To apply the configuration change, SELinux requires a server reboot, so you can either restart the server using the IT Web Services control panel or you can simply use the
sudo shutdown -r now
When the server reboots, your SSH session will get disconnected and you may see a message informing you about a
'broken pipe' or
'Connection closed by remote host'. This is nothing to worry about, simply wait for 20 seconds or so and then SSH back in again (with your own username and domain):
Or (with your own username and IP address):
Once you have logged back in, you should check the status of SELinux with the
sestatus command to make sure it is properly disabled:
You should see a message saying
SELinux status: disabled. If you see a message saying
SELinux status: enabled (or something similar) you will need to repeat the above steps and ensure that you properly restart your server.
Step 6: Install PHP 7.1
We can now install PHP 7.1 along with all of the necessary PHP modules required by Omeka Classic CMS:
sudo dnf -y install php php-mysqlnd php-mbstring php-gd php-common php-pdo php-pecl-imagick php-xml php-zip
Step 7: Install MariaDB (MySQL) Server
Fedora 26 defaults to using MariaDB database server, which is an enhanced, fully open source, community developed, drop-in replacement for MySQL server.
Install MariaDB database server:
sudo dnf -y install mariadb-server
Start and enable MariaDB server to execute automatically at boot time:
sudo systemctl enable mariadb sudo systemctl start mariadb
Secure your MariaDB server installation:
root password will be blank, so simply hit enter when prompted for the
When prompted to create a MariaDB/MySQL
root user, select “Y” (for yes) and then enter a secure
root password. Simply answer “Y” to all of the other yes/no questions as the default suggestions are the most secure options.
Step 8: Create Database for Omeka Classic CMS
Log into the MariaDB shell as the MariaDB
root user by running the following command:
sudo mysql -u root -p
To access the MariaDB command prompt, simply enter the MariaDB
root password when prompted.
Run the following queries to create a MariaDB database and database user for Omeka Classic CMS:
CREATE DATABASE omeka_db CHARACTER SET utf8 COLLATE utf8_general_ci; CREATE USER 'omeka_user'@'localhost' IDENTIFIED BY 'UltraSecurePassword'; GRANT ALL PRIVILEGES ON omeka_db.* TO 'omeka_user'@'localhost'; FLUSH PRIVILEGES; EXIT;
You can replace the database name
omeka_db and username
omeka_user with something more to your liking, if you prefer. Also, make sure that you replace “UltraSecurePassword” with an actually secure password.
Step 9: Install Omeka Classic CMS Files
Change your current working directory to the default web directory:
If you get an error message saying something like
'No such file or directory' then try the following command:
cd /var/www/ ; sudo mkdir html ; cd html
Your current working directory will now be:
/var/www/html/. You can check this with the
pwd (print working directory) command:
wget to download the Omeka Classic CMS installation package:
sudo wget https://github.com/omeka/Omeka/releases/download/v2.5.1/omeka-2.5.1.zip
Please note: You should definitely check for the most recent version by visiting the Omeka Classic CMS download page.
List the current directory to check that you have successfully downloaded the file:
Let’s quickly install
unzip so we can unzip the file:
sudo dnf -y install unzip
Now uncompress the zip archive:
sudo unzip omeka-2.5.1.zip
Move all of the installation files to the web root directory:
sudo mv omeka-2.5.1/* /var/www/html
Change ownership of the web files to avoid any permissions problems:
sudo chown -R apache:apache * ./
Restart Apache again:
sudo systemctl restart httpd
Now we’re ready to move on to the final step.
Step 10: Install ImageMagick
Omeka Classic CMS requires ImageMagick to process images so let’s make sure that it is installed:
sudo dnf -y install ImageMagick
Step 11: Complete Omeka Classic CMS Installation
To complete the Omeka Classic CMS installation, we first need to edit the Omeka Classic CMS database configuration file, so first make sure you are in the webroot and then open the
sudo vi ./db.ini
XXXXXXXvalues with your database configuration details, as follows:
[database] host = "localhost" username = "omeka_user" password = "UltraSecurePassword" dbname = "omeka_db" prefix = "omeka_" charset = "utf8" ;port = ""
Once you have added the appropriate configuration values you can save and exit the configuration file.
Now visit the IP address of your server instance in your browser, or if you’ve already configured your IT Web Services DNS settings (and given it enough time to propagate) you can simply visit your domain instead.
To access the Omeka Classic CMS installation page, enter your IT Web Services instance IP address into your browser address bar, followed by
On the Omeka
Configure Your Sitepage, enter the following
Default Superuser Account:
Username: <superuser username> Password: <a secure password> Email: <superuser email address>
Next, enter the following
Administrator Email: <administrator email> Site Title: <the title off the site>
You can leave the rest of the
Site Settingsat their default values or you can edit them to suit your personal requirements.
When you are satisfied with the above site configuration details, click
Installto finalize the installation.
You will be redirected to a
To access the admin section simply click on the
Admin Dashboard button and enter your username and password. If you aren’t redirected to the admin login page, you can enter the admin address manually:
You are now ready to start adding your content and configuring your materials and collections. Make sure you check out the excellent Omeka Classic CMS documentation for more information about how to build and configure your site.
Do you need help setting up this on your own service?
Please contact us and we’ll provide you the best possible quote!