Learn How To Install CMS Made Simple 2.2 on a Fedora 26 LAMP VPS
Table of Contents
- Step 1: Add a Sudo User
- Step 2: Update Fedora 26 System
- Step 3: Install Apache Web Server
- Step 4: Open Web Firewall Ports
- Step 5: Disable SELinux
- Step 6: Install PHP 7.1
- Step 7: Install MariaDB (MySQL) Server
- Step 8: Create Database for CMS Made Simple
- Step 9: Install CMS Made Simple Files
- Step 10: Complete CMS Made Simple Installation
If you are using a different system, please check our other tutorials.
How to Install CMS Made Simple 2.2 on a CentOS 7 LAMP VPS
How to Install CMS Made Simple 2.2 on a Debian 9 LAMP VPS
How to Install CMS Made Simple 2.2 on a FreeBSD 11 FAMP VPS
How to Install CMS Made Simple 2.2 on an Ubuntu 16.04 LAMP VPS
CMS Made Simple 2.2 is a flexible and extensible, free and open source Content Management System (CMS) intelligently designed to be versatile and adaptable to the needs of developers, designers and end-users. CMS Made Simple 2.2 features an intuitive user interface and simple to use WYSIWYG page editor, elegantly simple content management capabilities, flexible layout and templating possibilities using Smarty tags, a rich modular API, and the ability to fully integrate with third-party PHP applications.
In this tutorial we are going to install CMS Made Simple 2.2 on a Fedora 26 LAMP VPS using Apache web server, PHP 7.1, and a MariaDB database.
- A clean IT Web Services Fedora 26 server instance with SSH access
Step 1: Add a Sudo User
We will start by adding a new
First, log into your server as
Add a new user called
user1 (or your preferred username):
Next, set the password for the
When prompted, enter a secure and memorable password.
Now check the
/etc/sudoers file to make sure that the
sudoers group is enabled:
Look for a section like this:
%wheel ALL=(ALL) ALL
This line tells us that users who are members of the
wheel group can use the
sudo command to gain
root privileges. It should be uncommented by default, so you can simply exit the file.
Once you have edited the file, you can save and exit by pressing
Esc and then entering
:wq to “write” and “quit” the file.
Next we need to add
user1 to the
usermod -aG wheel user1
We can verify the
user1 group membership and check that the
usermod command worked with the
Now use the
su command to switch to the new sudo user
su - user1
The command prompt will update to indicate that you are now logged into the
user1 account. You can verify this with the
Now restart the
sshd service so that you can login via
ssh with the new non-root sudo user account you have just created:
sudo systemctl restart sshd
root account (which will disconnect your
You can now
ssh into the server instance from your local host using the new non-root sudo user
If you want to execute
sudo without having to type a password every time, then open the
/etc/sudoers file again, using
Edit the section for the
wheel group so that it looks like this:
%wheel ALL=(ALL) NOPASSWD: ALL
Please note: Disabling the password requirement for the sudo user is not a recommended practice, but it is included here as it can make server configuration much more convenient and less frustrating, especially during longer systems administration sessions. If you are concerned about the security implications, you can always revert the configuration change to the original after you finish your administration tasks.
Whenever you want to log into the
root user account from within the
sudo user account, you can use one of the following commands:
sudo -i sudo su -
You can exit the
root account and return back to your
sudo user account any time by simply typing
Step 2: Update Fedora 26 System
Before installing any packages on the Fedora server instance, we will first update the system.
Make sure you are logged in to the server using a non-root sudo user and run the following command:
sudo dnf -y update
Step 3: Install Apache Web Server
Install the Apache web server:
sudo dnf -y install httpd
Then, use the
systemctl command to start and enable Apache to execute automatically at boot time:
sudo systemctl enable httpd sudo systemctl start httpd
Check your Apache configuration file to ensure that the
DocumentRoot directive points to the correct directory:
sudo vi /etc/httpd/conf/httpd.conf
DocumentRoot configuration option should look like this:
Now, let’s make sure that the
mod_rewrite Apache module is loaded. We can do this by searching the Apache base modules configuration file for the term “
Open the file:
sudo vi /etc/httpd/conf.modules.d/00-base.conf
Search for the term
mod_rewrite Apache module is loaded, you will find a configuration line looking like this:
LoadModule rewrite_module modules/mod_rewrite.so
If the above line starts with a semi-colon, you will need to remove the semi-colon to uncomment the line and load the module. This, of course, applies to any other required Apache modules too.
We now need to edit Apache’s default configuration file so that
mod_rewrite will work correctly with CMS Made Simple.
Open the file:
sudo vi /etc/httpd/conf/httpd.conf
Then find the section that starts with
<Directory "/var/www/html"> and change
AllowOverride none to
AllowOverride All. The end result (with all comments removed) will look something like this:
<Directory "/var/www/html"> Options Indexes FollowSymLinks AllowOverride All Require all granted </Directory>
Now save and close the Apache configuration file.
We will restart Apache at the end of this tutorial, but restarting Apache regularly during installation and configuration is certainly a good habit, so let’s do it now:
sudo systemctl restart httpd
Step 4: Open Web Firewall Ports
We now need to open the default
HTTPS ports, as they will be blocked by
firewalld by default.
Open the firewall ports:
sudo firewall-cmd --permanent --add-port=80/tcp sudo firewall-cmd --permanent --add-port=443/tcp
Reload the firewall to apply the changes:
sudo firewall-cmd --reload
You will see the word
success displayed in your terminal after each successful firewall configuration command.
We can quickly verify that the Apache
HTTP port is open by visiting the IP address or domain of the server instance in a browser:
You will see the default Apache web page in your browser.
Step 5: Disable SELinux
SELinux stands for “Security Enhanced Linux”. It is a security enhancement to Linux which allows users and administrators more control over access control. It is enabled by default in Fedora 26, but it is definitely not essential for server security as many Linux server distributions do not ship with it installed or enabled by default.
To avoid file permission problems with CMS Made Simple later down the line, we are going to disable SELinux, for now. So open the SELinux configuration file with your favourite terminal editor:
sudo vi /etc/selinux/config
SELINUX=disabled and then save the file.
To apply the configuration change, SELinux requires a server reboot, so you can either restart the server using the IT Web Services control panel or you can simply use the
sudo shutdown -r now
When the server reboots, your SSH session will get disconnected and you may see a message informing you about a
'broken pipe' or
'Connection closed by remote host'. This is nothing to worry about, simply wait for 20 seconds or so and then SSH back in again (with your own username and domain):
Or (with your own username and IP address):
Once you have logged back in, you should check the status of SELinux again with the
sestatus command to make sure it is properly disabled:
You should see a message saying
SELinux status: disabled. If you see a message saying
SELinux status: enabled (or something similar) you will need to repeat the above steps and ensure that you properly restart your server.
Step 6: Install PHP 7.1
We can now install PHP 7.1 along with all of the necessary PHP modules required by CMS Made Simple:
sudo dnf -y install php php-mysqlnd php-mbstring php-gd php-common php-pdo php-pecl-imagick php-xml php-zip
Step 7: Install MariaDB (MySQL) Server
Fedora 26 defaults to using MariaDB database server, which is an enhanced, fully open source, community developed, drop-in replacement for MySQL server.
Install MariaDB database server:
sudo dnf -y install mariadb-server
Start and enable MariaDB server to execute automatically at boot time:
sudo systemctl enable mariadb sudo systemctl start mariadb
Secure your MariaDB server installation:
root password will be blank, so simply hit enter when prompted for the
When prompted to create a MariaDB/MySQL
root user, select “Y” (for yes) and then enter a secure
root password. Simply answer “Y” to all of the other yes/no questions as the default suggestions are the most secure options.
Step 8: Create Database for CMS Made Simple
Log into the MariaDB shell as the MariaDB
root user by running the following command:
sudo mysql -u root -p
To access the MariaDB command prompt, simply enter the MariaDB
root password when prompted.
Run the following queries to create a MariaDB database and database user for CMS Made Simple:
CREATE DATABASE cms_db CHARACTER SET utf8 COLLATE utf8_general_ci; CREATE USER 'cms_user'@'localhost' IDENTIFIED BY 'UltraSecurePassword'; GRANT ALL PRIVILEGES ON cms_db.* TO 'cms_user'@'localhost'; FLUSH PRIVILEGES; EXIT;
You can replace the database name
cms_db and username
cms_user with something more to your liking, if you prefer. Also, make sure that you replace “UltraSecurePassword” with an actually secure password.
Step 9: Install CMS Made Simple Files
Change your current working directory to the default web directory:
If you get an error message saying something like
'No such file or directory' then try the following command:
cd /var/www/ ; sudo mkdir html ; cd html
Your current working directory will now be:
/var/www/html/. You can check this with the
pwd (print working directory) command:
wget to download the CMS Made Simple installation package:
sudo wget http://s3.amazonaws.com/cmsms/downloads/14054/cmsms-2.2.4-install.zip
Please note: You should definitely check for the most recent version by visiting the CMS Made Simple download page.
List the current directory to check that you have successfully downloaded the file:
Let’s quickly install
unzip so we can unzip the file:
sudo dnf -y install unzip
Now uncompress the zip archive:
sudo unzip cmsms-2.2.4-install.zip
Change ownership of the web files to avoid any permissions problems:
sudo chown -R apache:apache * ./
Restart Apache again:
sudo systemctl restart httpd
Now we’re ready to move on to the final step.
Step 10: Complete CMS Made Simple Installation
It’s now time to visit the IP address of your server instance in your browser, or if you’ve already configured your IT Web Services DNS settings (and given it enough time to propagate) you can simply visit your domain instead.
To access the CMS Made Simple installation page, enter your IT Web Services instance IP address into your browser address bar, followed by
The CMS Made Simple installer contains quite a lot of options, so here are a few pointers to help you along:
Welcome page, select your language and leave the
Enable advanced modeoption set to
No. When you are ready, click the
Nextbutton to continue.
You will see a warning message informing you that you have files in the webroot directory. This is perfectly fine, so just click on the
Installbutton to continue to step 3.
You will see a message confirming that you have passed all
Compatibility Tests. You can simply click
Nextto continue to Step 4.
Fill in your database details as follows:
Database Hostname: localhost Database Name: cms_db User name: cms_user Password: UltraSecurePassword
Server Timezonesettings will get detected automatically, so you can click
Enter your admin details as follows:
User name: admin Email Address: <your admin email> Password: <your password> Repeat password: <the same password>
Web Site Nameand select any
Additional Languagesyou want to install, and click
You will now be prompted to
Install Application Filesso simply click
You will be shown a list of database tasks the installer will perform so, again, simply click
You will see a confirmation page with a message saying
We are done!
You can access the admin section by simply clicking on the
CMSMS admin panel link and then entering your username and password on the resulting login page.
If you are not redirected to the admin login page, you can enter the admin address manually:
For security reasons, you should remove the installer files from your webroot before continuing:
sudo rm cmsms-2.2.4-install.*
You are now ready to start adding your content and configuring the look and feel of your site. Make sure you check out the excellent CMS Made Simple documentation for more information about how CMS Made Simple works.
Do you need help setting up this on your own service?
Please contact us and we’ll provide you the best possible quote!