Table of Contents
- Install Alpine Linux 3.9.0 on the servers
- Post-installation server configuration
- Install Docker on your servers
- Initialize a Docker swarm with one manager node and one worker node
- Deploy Portainer with SSL to manage your Docker swarm
This guide will show you how to create and configure a Docker swarm using multiple Alpine Linux 3.9.0 servers and Portainer.
To begin, you will need at least two VPS OSP2 servers running Alpine Linux 3.9.0. Within your Docker swarm, one of these servers will act as a
manager node – interfacing with external networks and delegating jobs to worker nodes. The other server will then act as a
worker node – executing jobs delegated to it by the manager node.
Note that you can launch more than two servers if your application requires redundancy and/or more computing power, and the steps provided in this guide will still apply.
Visit the IT Web Services server VPS plans.
You can select any location from the
Server Location section, however all servers must be in the same location, otherwise it will not be possible to deploy a Docker swarm to them.
ISO Library tab of the
Server Type section and choose the
Alpine Linux 3.9.0 x86_64 image.
Select an appropriate option from the
Server Size section. This guide will use the 25 GB SSD server size, but this may be insufficient to meet your application’s resource requirements. While IT Web Services makes it easy to upgrade a server’s size after it has already been launched, you should still carefully consider which server size your application needs to perform optimally.
Additional Features section, you must select the
Enable Private Networking option. While the other options are not required to follow this guide, you should consider whether or not each one makes sense in the context of your application.
If you’ve previously enabled the
Multiple Private Networks option on your account, you will then need to either select an existing or create a new private network for your servers. If you have not enabled it, then you can ignore this section. For information on manually configuring private networks, see this guide.
Firewall Group section for now. Only the server acting as a manager node in the Docker swarm will need exposed ports, and this should be configured after server deployment.
At the very bottom of the page, you must enter a
Server Qty of at least two. As mentioned previously, you may need more than two servers, but two is sufficient to follow this guide.
Finally, in the
Server Hostname & Label section, enter meaningful and memorable hostnames and labels for each server. For the purposes of this guide, the hostname and label of the first server will be
Docker Manager, respectively- and
Docker Worker for the second, respectively.
After double checking all your configurations, you can then click the
Deploy Now button at the bottom of the page to launch your servers.
Install Alpine Linux 3.9.0 on the servers
Because you chose an OS from IT Web Services’s ISO library, you’ll need to manually install and configure Alpine Linux 3.9.0 on each server.
After giving IT Web Services a minute or two to allocate your servers, click the triple dot
more options icon for the
Docker Manager server on the server management interface, and then choose the
View Console option.
You should be redirected to a console with a login prompt. If not, please wait another minute for IT Web Services to finish deploying your servers.
At that login prompt, enter
root as the username. The live version of Alpine Linux 3.9.0 (which is what your servers are currently running) does not require the superuser to enter a password when logging in.
Once you have successfully logged into the root account, you will see a welcome message followed by a shell prompt that looks like the following:
To start the Alpine Linux installer, enter the following command:
First, choose an appropriate keyboard layout. This guide will use the
us layout and variant.
When setting the hostname, choose the same hostname that you set for this server during deployment. If you’ve been following this guide exactly, the hostname should be
Two network interfaces should be available:
eth1. If you only see
eth0, that means you did not configure your servers’ private network correctly. Initialize
dhcp, and initialize
eth1 using the private IP address, netmask, and gateway this server was assigned during deployment. You can access these details from the settings interface of your server. When prompted, do not perform any manual network configuration.
Enter a new password for the root account, and then select a timezone appropriate for the location you chose to deploy these servers to.
If you intend to use an HTTP/FTP proxy, enter its URL, otherwise do not set a proxy URL.
Choose an NTP client to manage system clock synchronization. This guide will use
When asked for a package repository mirror to use, either pick one explicitly by entering its number; automatically detect and select the fastest one by entering
f; or manually edit the repository configuration file by entering
e, which is not recommended unless you’re familiar with Alpine Linux. This guide will use the first mirror.
If you plan to use SSH to access your servers or to host an SSH based file system, select an SSH server to use. This guide will use
When prompted for a disk to use, choose disk
Alpine Linux 3.9.0 should now be installed on your server. Repeat this process for all other servers you deployed earlier, ensuring you substitute the correct values for hostname and the
eth1 network interface.
Post-installation server configuration
At this point, your servers are still running the live ISO version of Alpine Linux 3.9.0. To boot from the SSD installation, visit the settings interface of your server, navigate to the
Custom ISO side menu entry, and click the
Remove ISO button. This should reboot the server. If it does not, then manually reboot.
Once the server has finished rebooting, navigate back to the web console for the server
Log into the root account using the password you set earlier during the installation process.
Enable the community package repository by uncommenting the third line of
vi. You can enable the edge and testing repositories in a similar manner, but they are not required to follow this guide.
Synchronize the server’s local package index with the remote repository you selected earlier by entering the following shell command:
# apk update
Then upgrade outdated packages:
# apk upgrade
As before, repeat this configuration process for each server you deployed earlier.
Install Docker on your servers
Before installing the Docker package itself, you may want to create a separate
docker user. You can do this using the following command:
# adduser docker
Note: This new user and any users added to the new
docker group will have root privileges once the Docker package has been installed. See the following issue from the Moby Github repository:
Due to the
--privilegedin docker, anyone added to the ‘docker’ group is root equivalent. Anyone in the docker group has a back door around all privilege escalation policy and auditing on the system.
This is different from someone being able to run running sudo to root, where they have policy, and audit applied to them.
If you’d like to give sudo permission to the
docker user, first install the
# apk add sudo
Then create a
# addgroup sudo
Finally, add the
docker user to the
# adduser docker sudo
https://www.itweb.services/tutorials/linux-guides/how-to-use-sudo-on-debian-centos-and-freebsd”>this guide to finish configuring sudo.
At this point, you’re ready to install the Docker package. Note that it is not strictly necessary to have a separate, sudo-capable
docker user to install and configure Docker, but this guide follows that convention.
Install the Docker package with the following command:
# apk add docker
Then enable the Docker init script:
# rc-update add docker
Finally, start the Docker daemon:
# rc-service docker start
You can verify that Docker is running with this command:
# docker info
As with last time, repeat this Docker installation process for each server you deployed at the start.
Initialize a Docker swarm with one manager node and one worker node
With all of that setup dealt with, you’re finally ready to create the Docker swarm.
Create a swarm and add a manager node
Navigate back to the web console of your
Docker Manager server. You will configure this server as a manager node in your swarm. If you chose to create the
docker user earlier, log in using that account rather than the superuser.
Enter the following command, but replace
192.0.2.1 with the private, (not the public), IP address your
Docker Manager server was assigned:
$ docker swarm init --advertise-addr 192.0.2.1
Docker will display a command you can execute on other servers in the private network to add them as worker nodes to this new swarm. Save this command.
Add a worker node
Now navigate to the web console of your
Docker Worker server, signing in with the
docker user if you created it.
To add this server as a worker node to the swarm you just created, execute the command you saved from the output of the swarm creation command. It will look similar to the following:
$ docker swarm join --token SWMTKN-1-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-XXXXXXXXXXXXXXXXXXXXXXXXX 192.0.2.1:2377
https://www.itweb.services/tutorials/linux-guides/configuring-private-network”>this guide for troubleshooting.
If you deployed more than two servers at the beginning, you can add the rest as worker nodes to your swarm using the command above, increasing the amount resources available to your application. Alternatively, you can add additional manager nodes, but that’s beyond the scope of this guide.
Deploy Portainer with SSL to manage your Docker swarm
At this point your Docker swarm is ready for use. You may, however, optionally launch a Portainer stack on the manager node in your swarm. Portainer offers a convenient web interface for managing your swarm and the nodes therein.
It’s now time to create a firewall group for your swarm. Unless your application specifically requires it, only expose ports on your manager nodes. Exposing ports on your worker nodes without careful consideration can introduce vulnerabilities.
Navigate to the firewall management interface and create a new firewall group. Your application should dictate which ports to expose, but you must, at the very least, expose port
9000 for Portainer. Apply this firewall group to the
Docker Manager server.
https://www.itweb.services/tutorials/linux-guides/setup-lets-encrypt-with-apache-on-ubuntu-16-04″>using Let’s Encrypt in production.
Navigate to the web console of the
Docker Manager server, log in using the
docker user, and use the following commands to generate a self-signed OpenSSL certificate:
$ mkdir ~/certs $ openssl genrsa -out ~/certs/portainer.key 2048 $ openssl req -new -x509 -sha256 -key ~/certs/portainer.key -out ~/certs/portainer.pem -days 3650
Create a new file,
~/portainer-agent-stack.yml, with the following contents:
version: '3.2' services: agent: image: portainer/agent environment: AGENT_CLUSTER_ADDR: tasks.agent CAP_HOST_MANAGEMENT: 1 volumes: - /var/run/docker.sock:/var/run/docker.sock - /var/lib/docker/volumes:/var/lib/docker/volumes - /:/host networks: - agent_network deploy: mode: global portainer: image: portainer/portainer command: -H tcp://tasks.agent:9001 --tlsskipverify --ssl --sslcert /certs/portainer.pem --sslkey /certs/portainer.key ports: - target: 9000 published: 9000 protocol: tcp mode: host volumes: - portainer_data:/data - /home/docker/certs:/certs networks: - agent_network deploy: mode: replicated replicas: 1 placement: constraints: [node.role == manager] networks: agent_network: driver: overlay attachable: true volumes: portainer_data:
After modifying this Docker stack configuration file to conform to your requirements, you can deploy it:
$ docker stack deploy --compose-file ~/portainer-agent-stack.yml portainer
To verify that Portainer is working, execute the following command after having given Docker a minute or two to deploy the stack:
$ docker ps
You will see two containers with the images
portainer/agent:latest, verifying that Portainer started correctly.
You can now configure and manage your Docker swarm by visiting the public IP address of your
Docker Manager server on port
9000 using HTTPS.
Do you need help setting up this on your own service?
Please contact us and we’ll provide you the best possible quote!